GM100 Modular UPS. 600 kVA to 3.2 MW+.
Start with six GM100 modules in a 600 kVA rack. Scale to six or more coordinated racks for 3.2 MW+ systems, with online double-conversion, hot-swap serviceability and project-specific redundancy for data center critical power.
UPS, BESS & Substations · Lead Times
12–16 weeks production lead time, plus 4–8 weeks for shipping.
Expediting options are available. Contact us to discuss your project schedule.
1600 kVA
1600 kVA Rack with 16×GM100
600 kVA
600 kVA Rack with 6×GM100
Module → rack → multi-rack system
One rack today. Multi-megawatt capacity as you grow.
6 GM100 modules
Populate one 600 kVA rack with six 100 kVA modules. This is the modular building block.
6+ coordinated racks
Combine six or more 600 kVA racks through an approved parallel architecture, with coordinated controls, bypass and electrical distribution.
3.2 MW+ systems
Configure active-power capacity around your critical load, operating power factor, redundancy reserve and site conditions.
Six 600 kVA racks total 3,600 kVA of nameplate apparent power, not an unconditional 3.6 MW of usable output. The 3.2 MW+ configuration target is subject to approved engineering, power factor, redundancy and derating. Rack count, battery runtime and system-level pricing are confirmed per project; single-rack starting prices below are not multi-rack package prices.
Discuss a Multi-Rack ConfigurationUPS Models
Rack Options for Your UPS System
1600 kVA Modular UPS
1600 kVA Rack with 16×GM100
Full-rack modular UPS designed for hyperscale and large enterprise data center deployments. Sixteen GM100 power modules deliver 1600 kVA of clean, conditioned power with N+1 or N+2 module-level redundancy — no single module failure takes down the system.
Voltage
480V, 60Hz (400–480V)
Modules
16×GM100
Topology
Online double-conversion
Breakers
3 (Input / Output / MBB)
Included Breakers
- Input breaker
- Output breaker
- Maintenance bypass breaker
- 16 hot-swappable GM100 power modules
- Input, output, and maintenance bypass breakers
- Online double-conversion topology
- Module-level N+1 / N+2 redundancy
- Hot-swap modules — zero downtime maintenance
- Wide input range: 400–480V, 60Hz
- SNMP / RS-232 / dry contact monitoring
600 kVA Modular UPS
600 kVA Rack with 6×GM100
Six GM100 power modules form a 600 kVA rack. Start with one rack and build a coordinated array of six or more 600 kVA racks for configured systems of 3.2 MW+. Final usable output depends on power factor, redundancy reserve, derating and the approved design.
Voltage
480V, 60Hz (400–480V)
Modules
6×GM100
Topology
Online double-conversion
Breakers
3 (Input / Output / MBB)
Included Breakers
- Input breaker
- Output breaker
- Maintenance bypass breaker
- 6 hot-swappable GM100 power modules
- 600 kVA racks scale to 6+ rack arrays / 3.2 MW+ systems
- Input, output, and maintenance bypass breakers
- Online double-conversion topology
- Module-level N+1 redundancy
- Hot-swap modules — zero downtime maintenance
- Wide input range: 400–480V, 60Hz
- SNMP / RS-232 / dry contact monitoring
Custom capacity configurations available. Contact BuildingFab for project-specific sizing and multi-unit deployments.
Why BuildingFab Modular UPS
Built for Critical Power Continuity
Online Double-Conversion
Both UPS models use true online double-conversion topology — all load power passes through the inverter continuously, ensuring zero transfer time and full isolation from utility disturbances.
Hot-Swap Modules
GM100 power modules can be swapped under live load without a maintenance window. N+1 and N+2 configurations mean a module failure never interrupts the protected load.
Three-Breaker Configuration
Every rack includes a dedicated input breaker, output breaker, and a true maintenance bypass breaker — enabling full UPS isolation for servicing without dropping the critical load.
Wide Input Voltage
Accepts input voltage from 400V to 480V at 60Hz, accommodating variance in utility supply and facility switchgear without battery stress or derating.
Rack-Integrated Design
Both capacities are delivered as complete, integrated rack assemblies. Modules, breakers, and monitoring are factory-installed and tested — ready for commissioning on arrival.
600 kVA Racks to 3.2 MW+
Populate each 600 kVA rack with six GM100 modules, then scale the system with six or more racks. Coordinated multi-rack configurations support 3.2 MW+; usable critical-load capacity depends on the approved electrical and redundancy design.
Standards & Certifications
Get Pricing
Request a UPS Quote
Tell us your capacity requirements and project timeline. Send your request directly to ms@buildingfab.com for project-specific pricing and lead times.
FAQ